Patch area, population density and the scaling of migration rates: the resource concentration hypothesis revisited

Empirical research has for a long time observed that animal densities may both increase and decrease with patch size, and these variable responses have been difficult to explain using the current theoretical framework. The most influential hypothesis, the resource concentration hypothesis, predicts only positive density–area relations, as a consequence of different emigration and immigration rates in small and large patches, and empirical deviations have inspired a flurry of alternative explanations. In this paper, we use realistic rules for the relationship between patch size and migration rates and show a wider predictive range for density–area relations than previously believed. Comparisons with published data suggest that observed density–area relations may easily fit in a framework based on a minimum set of behavioural and population processes. This does not imply that other mechanisms are unimportant, but merely that their quantitative importance can only be evaluated relative to patch geometry and local growth.     

Response of three lotic assemblages to riparian and catchment‐scale land use: implications for designing catchment monitoring programmes

1. Although many studies have focussed on the effects of catchment land use on lotic systems, the importance of broad (catchment) and fine (segment/reach) scale effects on stream assemblages remain poorly understood. 2. Nine biological metrics for macrophytes (498 sites), benthic macroinvertebrates (491) and fish (478) of lowland and mountain streams in four ecoregions of France and Germany were related to catchment and riparian buffer land use using partial Redundancy Analysis and Boosted Regression Trees (BRTs). 3. Lotic fauna was better correlated (mean max., r = 0.450) than flora (r = 0.277) to both scales of land use: the strongest correlations were noted for mountain streams. BRTs revealed strong non‐linear relationships between mountain assemblage metrics and land use. Correlations increased with increasing buffer lengths, suggesting the importance of near‐stream land use on biotic assemblages. 4. Several metrics changed markedly between 10–20% (mountain ecoregions) and 40–45% (lowland) of arable land use, irrespective of the buffer size. At mountain sites with >10% catchment arable land use, metric values differed between sites with <30% and sites with >30% forest in the near‐stream riparian area. 5. These findings support the role of riparian land use in catchment management; however, differences between mountain and lowland ecoregions support the need for ecoregion‐specific management.     

Effects of ditch management on caddisfly, dragonfly and amphibian larvae in intensively farmed peat areas

Conservation of natural values within farming practice is growing rapidly within the Netherlands. The focus is primarily on terrestrial flora and fauna such as the vegetation in ditch banks and meadow birds. Knowledge needed to enhance biodiversity in ditches is limited. Therefore, a field study was set up to determine the effects of dredging, ditch cleaning and nutrient supply in the adjacent fields on caddisfly, dragonfly and amphibian larvae in the ditches in a peat area.Two-hundred forty ditches spread over 84 dairy farms were selected to determine the individual effect of several management aspects. Generalised linear modelling was used as a tool to detect the most relevant aspects and to obtain quantitative relations with the chance of the larvae being present.Dredging had an impact on the presence of all larvae types. The type of dredging machine, the dredging period, the water depth and the frequency of dredging can influence the presence of the larvae. The presence of caddisfly larvae was also affected by the cleaning machine and period and by the P supply in the adjacent field. The presence of amphibian larvae was also affected by the cleaning period.Measures that will enhance the presence of the larvae are formulated. Options for water boards and other government authorities to stimulate farmers to take these measures are given.     

How do elevated CO2 and O3 affect the interception and utilization of radiation by a soybean canopy?

Net productivity of vegetation is determined by the product of the efficiencies with which it intercepts light (?_i) and converts that intercepted energy into biomass (?_c). Elevated carbon dioxide (CO₂) increases photosynthesis and leaf area index (LAI) of soybeans and thus may increase ?_i and ?_c; elevated O₃ may have the opposite effect. Knowing if elevated CO₂ and O₃ differentially affect physiological more than structural components of the ecosystem may reveal how these elements of global change will ultimately alter productivity. The effects of elevated CO₂ and O₃ on an intact soybean ecosystem were examined with Soybean Free Air Concentration Enrichment (SoyFACE) technology where large field plots (20‐m diameter) were exposed to elevated CO₂ (～550 μmol mol^?1) and elevated O₃ (1.2 × ambient) in a factorial design. Aboveground biomass, LAI and light interception were measured during the growing seasons of 2002, 2003 and 2004 to calculate ?_i and ?_c. A 15% increase in yield (averaged over 3 years) under elevated CO₂ was caused primarily by a 12% stimulation in ?_c , as ?_i increased by only 3%. Though accelerated canopy senescence under elevated O₃ caused a 3% decrease in ?_i, the primary effect of O₃ on biomass was through an 11% reduction in ?_c. When CO₂ and O₃ were elevated in combination, CO₂ partially reduced the negative effects of elevated O₃. Knowing that changes in productivity in elevated CO₂ and O₃ were influenced strongly by the efficiency of conversion of light energy into energy in plant biomass will aid in optimizing soybean yields in the future. Future modeling efforts that rely on ?_c for calculating regional and global plant productivity will need to accommodate the effects of global change on this important ecosystem attribute.     

Evaluation of nutrients and related environmental factors for wolfberry (Lycium barbarum) fruits grown in the different areas of China

The wolfberry (Lycium barbarumL.) fruit has been used in traditional Chinese medicine and food, but fruits grown in various geographic areas are significantly different in quality and content of functional components. In this study, we tested the internal nutritional ingredients and related environmental factors using forty-two wolfberry fruits collected from seven wolfberry producing regions in China (Yinchuan and Zhongning in Ningxia, Jingyuan in Gansu, Nuomuhong Farm in Qinghai,Hangjinhouqi and Wulateqianqi in Inner Mongolia, and Jinghe in Xinjiang). The nutritional ingredients of the forty-two wolfberry fruits are dependent on the environment. Correlation analysis revealed that the amount of nutrients was highly related to each other. Based on the analysis ofratio of total sugar to betaine (sugar-alkali ratio), we have successfully established quality standards for the wolfberry based on the levels of betaine and sugar. The standards were as follows: high betaine low sugar (sugar-alkali ratio≤15.1), high betaine medium sugar (15<sugar-alkali ratio≤60), medium betaine medium sugar (60<sugar-alkali ratio≤121), medium betaine high sugar (121<sugar-alkali ratio≤165), and low betaine high sugar (sugar-alkali ratio>165). Zhongning of Ningxia is the geo-authentic producing region of the wolfberry, whereby the wolfberries are rich in main pharmacological ingredients Lycium barbarum polysaccharide (LBP) and three trace elements (iron, manganese and selenium) and medium sugar-alkali ratio. In addition, the correlation analysis showed that both the altitude and average temperature difference between day and night had positive effects on the wolfberry flavonoids content but the annual sunshine duration negatively affected the betaine contents of the wolfberry fruit.     

MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Sampling for Explosives-Residues at Fort Greely,Alaska

Fort Greely, Alaska has an extensive complex of weapon training and testing areas located on lands withdrawn from the public domain under the Military Lands Withdrawal Act (PL106-65). The Army has pledged to implement a program to identify possible munitions contamination. Because of the large size (344,165,000 m²) of the high hazard impact areas, characterization of these constituents will be difficult. We used an authoritative sampling design to find locations most likely to contain explosives-residues on three impact areas. We focused our sampling on surface soils and collected multi-increment and discrete samples at locations of known firing events and from areas on the range that had craters, pieces of munitions, targets, or a designation as a firing point. In the two impact areas used primarily by the Army, RDX was the most frequently detected explosive. In the impact area that was also used by the Air Force, TNT was the most frequently detected explosive. Where detected, the explosives concentrations generally were low (<0.05 mg/kg) except in soils near low-order detonations, where the explosive-filler was in contact with the soil surface. These low-order detonations potentially can serve as localized sources for groundwater contamination if positioned in recharge areas.